Published by Contact For Service Leave your thoughts

Kodak, considered to be the greatest manufacturer of the electronic device, its printers are widely acclaimed because of the great level of the performance and credibility that the printing machines offer. However, having said that, we must also mention here that there are a few issues related to its device. And, some of the major error codes related to the software are 3807, 6202, 7300 and a few others. Though these are minor technical errors of Kodak Printer, they are recurring ones, and this is what makes them even more frustrating for the users. So, as an advice, we would like to tell the users that instead of calling the experts at the Kodak Printer Support Number, it would be a good idea if you can try to resolve the matter on your own.  So here, we have come up with some of the best tips and tricks that would help you in resolving the common error codes of the Kodak Printer. Take a look:

How to fix 3807 Kodak Printer error code?

  1. At first, you need to disconnect the power all the power chords and cables that are connected to the printer.
  2. Later, you need to wait for at least 30 seconds for allowing the printer resetting.
  3. Here, you need to connect all the power adapter back again to the printer, followed by turning it on, in case it is necessary.

If the error has not been resolved:

  1. You need to open the printer access door.
  1. After that, you are supposed to remove it, followed by installing the printhead at least two times.
  2. Now, you are supposed to close the printer access door.
  3. Also, make sure that you wait for a few seconds until the printer is ready to use.

Now, even after the above steps, your issues are not resolved, make sure that you have followed these two steps:

  1. You must find out, and then choose the option for the firmware for your printer.
  2. You will be provided with a set of on-screen instruction for installing the firmware. You need to follow it accordingly.

How to fix 6202Kodak Printer error code?

To resolve this error:

  1. Now, for this, you need to press the power button, followed by turn off the printer.
  2. You  need to make sure that you have disconnected the power chords connecting the printer and the wall outlet.
  3. Also, you are supposed to wait for at least 30 seconds for allowing the printer to reset.
  4. Now, you must connect the power cables to the printer, followed by turning on the printer once again.

Now, even after the above-steps, your issues are not resolved, make sure that you have followed these two steps:

  1. You must find out, and then choose the option for the firmware for your printer.

You will be provided with a set of on-screen instruction for installing the firmware. You need to follow it accordingly

How to fix 7300 Kodak Printer error code?

Try to restart your printer.

  1. At first, you need to disconnect the power all the power chords and cables that are connected to the printer.
  2. Later, you need to wait for at least 30 seconds for allowing the printer resetting.
  3. Here, you need to connect all the power adapter back again to the printer, followed by turning it on, in case it is necessary.

In case, you are coming across any other error codes that are not mentioned in this blog, you may feel free to dial Kodak Printer Customer Support Phone Number. Get this number only from the website of Contactforservice, an online directory famous for listing out the numbers of customer support and services.